Tint Strip Field Guide

Prep the Surface
    • Ensure glass surface is cool to the touch: use mist of water to help quicken this proces.
    • For rear windows, ensure defroster lines are intact.

Apply Tint Strip
    • Spray directly onto adhesive residue or exposed film to the point of "soaked"
    • Let it dwell for 60–90 seconds (do not let it dry)

Agitate + Remove
    • Use a plastic razor or white scrub pad to loosen material
    • Reapply as needed for stubborn areas, each time giving the chemical time to penetrate the adhesive

Final Clean
    • Rinse with water or a mild glass cleaner
    • Wipe down with a clean microfiber towel