Geoshield Ceramic Elixir Coating Care Instructions

Ceramic Elixir may be applied to: Wheels, Plastic Vehicle Trim, Bumpers Trim, Moldings, Chrome, Aluminum Surfaces and Vehicle Painted Surfaces

• Apply indoors and let dry for 8-12 hours depending on temperature and humidity
• Detail exterior and paint correction as required.
• Polish surface to be coated and correct any blemishes and swirls.
• Remove polish residues with 15% IPA solution.
• Drop several drops of Elixir onto foam or microfiber applicator pad.
• Apply with applicator pad in overlapping stokes to a 2 x 2 work area or panel.
• Let product dry and set for roughly 5 minutes.
• Remove residue thoroughly after each panel with microfiber towel.
• Inspect that all residue is removed with microfiber cloth.
• Apply second coating immediately after applying first coat.

• Hand wash or light pressure wash vehicle as needed.
• Never Use automatic washes as the may scratch surfaces and deposit unwanted waxes or sealants.
• Dry vehicle after washing. Never let air dry to avoid water spots.
• Avoid washing in direct sunlight to minimize streaking and water spotting.
• Do not apply waxes, sealants or detail sprays.
• Properly lubricate and use clean towels to reduce swirls.
• Never use abrasive material or polish.
• Bugs, bird droppings, tar, sap, etc. should be cleaned off as soon as possible