Skip to product information
1 of 2

Ceramic Shield PPF No Cap Sheet

Ceramic Shield PPF No Cap Sheet

★★★★★ (6)
Shipping calculated at checkout.
Earn Points on this purchase. Learn more

What if you could have the protection of a PPF and the super hydrophobic properties of a ceramic coating all in one product? Now you can with Geoshield’s new Ceramic Shield paint protection film (PPF). Ceramic Shield is the ultimate protection for your vehicle.  Ceramic Shield is warrantied for 10 years against de-lamination, yellowing, bubbling and cracking.

Overall Thickness without Cap Sheet: 7.5mil
TPU Thickness: 6.5mil
Water Contact Angle: 135 degrees +/- 3%
ElongaIon at Break: Min 300%
Gloss: >85%
Self-Healing speed: 10 seconds +/- 5 seconds
View full details

Defends Against

  • Quality Adhesive

    You need an adhesive that is forgiving but strong. You need to be able to stretch the film and have it hold when tacked and not leave glue marks. We have perfectly weighted Ceramic Shield PPF adhesive to deliver an easy installation and long term bond that prevents lifting and peeling.    

  • Premium TPU

    All paint protection film is constructed with polyurethane film (TPU). All TPU has the ability to heal. Some can self-heal better than others without the need for outside heat but this is primarily attributed to the top coat. Ceramic Shield is an 8MIL PPF constructed with the finest TPU available on the market, and is optically clear with no orange peel. It also stretches well with no distortion.

  • Ceramic Top Coat

    Ceramic Shield PPF is manufactured with a nano ceramic top coat eliminating the need for post-install ceramic coating applications. The ceramic top coating increases gloss and adds protection while not interfering with the super-fast self-healing properties of this innovative clear bra. The high contact angle of 135 degrees makes water bead off and allows for easier cleaning. The ceramic top coat provides additional chemical and scratch resistance.

Collapsible content

Installation Fluids

Slip - Johnson & Johnson: We recommend finding J&J without glycerine, which can be seen in the ingredient list on the bottle. You can safely adjust your amount of slipperiness to your liking and depending on the substrate you are wrapping. Always use distilled water to ensure the cleanest install.

Flush,Tack - DI Water: We recommend distilled water as your flush and tack solution. To enhance the effectiveness you can heat the water which will flush the soap from the adhesive while also softening the film. One of our favorite and most economic methods is to use a Sous Vide to heat water in a Rubbermade container and put your bottles in there.

Isopropyl Alcohol: Alcohol can be used in the prep stage, but not during installation as part of a mounting solution. Alcohol softens and “loosens” the molecules of the adhesive. While alcohol will increase the tack of the adhesive temporarily it can lead to premature failure in the future. Avoid installation chemicals/gels that contain alcohol.

Maintaining and Cleaning

  • We recommend regular hand washes at least twice a month using a ph neutral soap. There is no need to put a wax on PPF, but coatings and sealants can be used once the hydrophobic effects of the film have diminished.
  • Avoid automatic car washes. This will void the warranty of your PPF.
  • Be careful with using high pressure near the edges of the PPF.

PPF Warranty

★★★★★
★★★★★
★★★★★
★★★★★