Products

At Geoshield, we are selective about what we put our name behind. InstaGel is an installation gel we endorse for use with Geoshield PPF and window film systems because it aligns with how our materials are designed to perform in the real world—under pressure, in complex areas, and in professional shops.

InstaGel was developed by an installer, for installers, with a focus on control, consistency, and finish quality. It enhances film manageability without altering adhesive behavior or introducing aggressive pre-tack. The result is a calmer, more predictable install—especially in high-risk zones where most failures begin.

This is not about changing how our films work.
It’s about supporting the installer with better process control.

Our films are engineered for performance and longevity. InstaGel complements that design by improving placement control, reducing visual defects, and minimizing rework—without compromising adhesion or finish.

Used correctly, InstaGel supports cleaner installs across both PPF and window film applications.

Take control of your installation process with InstaSlip, a premium, professional-grade slip soap engineered from the ground up by installers, for installers. Specifically formulated to complement the delicate adhesives used on high-end Paint Protection Film (PPF) and window tinting, InstaSlip provides the ultimate balance of glide, working time, and clean takedown.

Unlike traditional dish soaps or generic slip solutions, InstaSlip contains NO oils and NO conditioners. This ultra-pure, concentrated formula ensures zero residue is left behind and allows the solution to be completely and effortlessly flushed out using just distilled water.

For Window Film Installations:

• Extended Working Time: Gives you the freedom to position and adjust film perfectly before the adhesive grabs.

• Reduces Pre-Tacking: Minimizes early tacking, allowing for seamless, mistake-free alignment on complex glass.

• Flawless Clarity: Leaves zero soapy haze or oil streaks behind, maintaining the optical clarity Geoshield films are known for.

For Paint Protection Film (PPF) Installations:

• Combats Silvering: Engineered to reduce the micro-blisters and silvering lines common during stretching and squeegeeing.

• Eliminate Lift Lines & Pre-Tack Marks: Provides a smooth, uniform buffer between the squeegee, film, and clear coat to prevent premature adhesion and marring.

Designed for high‑volume shops, Jiffy SteamBlade keeps trimming and removal precise and efficient. The SteamBlade was built to change that. 💪 Built to Endure – Die-cast aluminum housing, stainless steel boiler, and all-brass fittings. flexible rubber hose reaches tough spots with ease Angled aluminum steam head targets edges and corners like a pro No-clog design – no internal water lines to jam up with hard water Includes steam-resistant nitrile gloves to protect your hands during battle Whether you're removing tint, film, vinyl wrap, or decals, SteamBlade arms you with speed, safety, and precision.

Where others fumble with razors and chemicals, you move with precision. 🔥 1500W of Power – Delivers consistent, penetrating steam that dissolves adhesive with ease. Built for daily use, it keeps installs moving smoothly while protecting the finish.

Fueled by steam and engineered for performance, SteamBlade cuts through adhesive like a blade through smoke—fast, clean, and without the risk of damaging glass or defrosters. Designed for tint pros who never back down from a job, it turns the tedious into the effortless. Step into the next generation of removal power. Pair it with the rest of your GeoShield toolset for a full pro‑level setup.

Designed for professional workflows, Korean 470gsm Edgeless Microfiber Towel helps you move faster without sacrificing finish. Our Korean Microfiber Cloth is crafted from premium 470 GSM, 70% polyester, 30% polyamide, 100% split South Korean-made microfiber, perfect for buffing Geoshield Ceramic Coatings and Ceramic Boost. The plush high pile features long, soft fibers that pull dirt and grit away from the paint surface, minimizing scratches and swirls. The zero-edge design with ultrasonic cut edges prevents scratching and streaking, eliminating the risk from rough polyester overlock stitching and edge binding.

These extremely soft and gentle, double-split fibers ensure a flawless, gentle touch, making it ideal for delicate automotive surfaces. Size: 16" x 16" It’s a reliable choice for shops that want speed, control, and repeatable results.

Built for installers, Lemon Suede Blade delivers consistent pressure and clean pulls where it matters. Evolved from the success of the Speed Wing family the new Suede Blade has quickly answered a lot of challenges for installers. The Suede Blade comes with a dual layer fabric that gives installers a cushioned, smooth fabric over the edge of the squeegee.

The Suede Blade glides over window tint, paint protection film and vinyl graphics/wraps with ease. Built for daily use, it keeps installs moving smoothly while protecting the finish.

Designed for professional workflows, Linshang IR Meter helps you move faster without sacrificing finish. LS162 transmission meter is a compact and small transmission meter that can simultaneously test three parameters of light transmittance, ultraviolet rejection rate and infrared rejection rate. The window film transmission meter can test the material optical properties such as automotive explosion-proof films, architectural films and laminated glass.

It is suitable for the display, exhibition, production, quality inspection, inspection and other occasions. The instrument has been widely used in solar film manufacturers, automotive film distribution, automotive film retail sales system. Add it to your workflow for cleaner installs, less rework, and more consistent output.

The Linshang LS122 Infrared Power Meter is a compact, handheld testing tool designed to measure infrared radiation intensity and demonstrate the heat-rejection performance of window film, architectural glass, and other solar-control materials.

With a wide measurement range of 0–40,000 W/m², the LS122 quickly measures infrared power density from sunlight, IR lamps, and other infrared light sources. It can also automatically calculate the infrared rejection rate, making it an excellent sales and demonstration tool for automotive tint, flat glass film, insulating glass, and solar equipment applications.

Designed with a wavelength response range of 1000nm–1700nm, the LS122 provides a practical way to show how effectively a material blocks heat-producing infrared energy. Its portable design makes it easy to use in showrooms, training environments, installation shops, and on-site demonstrations.

Built for installers, Little Foot Blue delivers consistent pressure and clean pulls where it matters. This squeegee measures about 6″ (15 cm) along the usable edge. The unіԛuе blade ѕhаре оf the Big Foot without the hаndlе.

The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee. Add it to your workflow for cleaner installs, less rework, and more consistent output.

The Little Foot has plenty of room to keep a good grip on the squeegee. Whether you’re doing one car or a full day of installs, it stays consistent.

Built for installers, Little Foot Red delivers consistent pressure and clean pulls where it matters. Little Foot fits comfortably in your hand, and features an angled, long–reach tip that gets behind gaskets and rubber seals quickly and easily. A line of hard card/squeegee tools that bring a whole new angle to quick and easy applications.

Measuring about 6 inches along the usable edge, Little Foot’s pointed tip lets you squeegee in tight spaces while keeping a firm grip on the tool.This squeegee measures about 6″ (15 cm) along the usable edge. The pointed edge of this tool allows the installer to squeegee in very tight areas. Add it to your workflow for cleaner installs, less rework, and more consistent output.

The pointed edge of this tool allows the installer to squeegee in very tight areas. The Little Foot has plenty of room to keep a good grip on the squeegee Whether you’re doing one car or a full day of installs, it stays consistent.

Long Caright Handle is a shop‑proven squeegee designed for precise control on film and glass. *Squeege blades sold separately, this is a handle only* One of the biggest issues installers encounter when installing thick mil films is extended dry time. This handle is designed to hold a 3/8” thick squeegee.

This is mainly due to not being able to extract a majority of the solution because their current tools flex too much or they don’t have enough strength to push as hard as they need to. The Caright Handle and 3/8″ Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool. Add it to your workflow for cleaner installs, less rework, and more consistent output.

The Caright Handle and 3/8″ Blades are the solution to that problem by taking more of the force required to adequately finish the job off of the installer and onto the tool. Pair it with the rest of your GeoShield toolset for a full pro‑level setup.

Lunar 20 is a dual-layer carbon-enhanced architectural film engineered for low reflectivity, strong solar performance, and safe compatibility with double-pane glass. Its carbon-based construction delivers a stable neutral-gray tone with excellent color retention, while the aluminum-nano carbon blend provides balanced heat rejection and glare control without the mirrored look associated with older technologies.

Designed as a 1.5-mil multi-layer system, Lunar 20 offers a sleek aesthetic upgrade and improved energy efficiency for homes and commercial spaces. With reliable UV protection and controlled internal reflectance, it is a smart choice for installers seeking a safe, modern, and visually subtle solution for dual-pane windows and light-sensitive architectural settings.

Flat Glass Warranty Download

To the Moon!

Crafted in partnership with T-Shirt Labs, the quality is next level: soft, durable, and made to move with you, whether you're cutting film or chasing the next horizon.

Mactac Card is a shop‑proven squeegee designed for precise control on film and glass. These block felt style cards are great for shrinking back windows. The soft felt skips over small imperfections and rocks that might be underneath the film to prevent tearing the film like a typical plastic hard card would otherwise do.

They are also more forgiving when shrinking the back window if you were to accidentally crease the film. The soft felt skips over small imperfections and rocks that might be underneath the film to prevent tearing the film like a typical plastic hard card would otherwise do. the lighter pressure won't damage the film. It’s a reliable choice for shops that want speed, control, and repeatable results.

Magnum Redline Squeegee Blade is a shop‑proven squeegee designed for precise control on film and glass. The Magnum Redline Squeegee Blade is a monster of a squeegee blade designed for hard-to-reach rear windows and tight decks in rear windows.

Pair this blade with a Fusion Auto Stretch Squeegee Handle for the best combination available in the industry. Built for daily use, it keeps installs moving smoothly while protecting the finish.

Microfiber Brick Coating Applicator is a pro‑grade shop essential built for installers who value consistency and clean results. Introducing our Microfiber BrickCoating Applicator, designed for ultimate comfort and efficiency. Available in two convenient sizes, this applicator ensures that your coating ends up on your vehicle, not deep within the applicator itself.

Small: 3.5" x 1.5" x 1.5" Large: 5" x 3.5" x 1.75" The built-in insulator layer beneath the microfiber surface prevents product absorption into the applicator, maximizing coverage and reducing waste. Built for daily use, it keeps installs moving smoothly while protecting the finish.

The large size is perfect for vehicle bodies, allowing for quick and even application, while the small size excels on rims and aggressive body panels, providing precise control in tighter areas. Upgrade your coating process with our Microfiber Coating Applicator for a smooth, efficient, and comfortable experience. Pair it with the rest of your GeoShield toolset for a full pro‑level setup.